Technical data

01

Nominal size	DN6 – DN100
Pressure rating	PN6 – PN63
Standard	DIN · ANSI
Connection type	Threaded
Design	DIN 2986 EN 10241EN 10241Steel threaded pipe fittings BS 1387 ASTM A 865
End connection standard	ISO 7-1 (BSP)ISO 7-1Pipe threads where pressure-tight joints are made on the threads (R/Rp) ANSI NPT

The standards listed apply to stocked products. Contact us for other standards.

Material

02

Material	SS316SS304St37

Features

03

Design

Usually cylindrical or round-headed, designed for threaded pipe connections.
One end is blind, i.e. closed to liquid/gas.
Typically male-threaded, fitted into couplings, reducers, valves and similar.

Advantages

Seals: closes open lines and prevents leaks.
Easy to fit: by hand or with a spanner.
Safety during maintenance: shuts off the flow and prevents hazards.
Economical: a small, cost-effective solution.

Considerations

Use matching threads and apply the sealant (PTFE tape, gasket, etc.) correctly.
Consider material strength in high-pressure applications.
Check for corrosion if plugs stay in place for long periods.

Plug type	Characteristics	Applications
Threaded plug	Designed for threaded connections	Water / gas installations
Flanged blank	For flanged systems	Industrial process lines
Weld cap	Welded to the pipe	High-pressure systems

Accessories

04

PTFE tape

PTFE (Teflon) tape is a thin, flexible sealing tape made of polytetrafluoroethylene. It is widely used on threaded pipe joints to prevent leaks and ensure a tight seal.